Monitoring the curing processes of epoxy oligomers with partially substituted polyethoxymetallosiloxanes by IR spectroscopy and thermomechanical analysis

In this work, the curing of «ED-20» epoxy resin with partially siloxy-substituted aluminum, iron, and zirconium siloxanes that we obtained previously was studied. The initial content of a metallosiloxane in the compositions was 5–50 wt% with respect to the resin. In all the cases, thermal curing was used to obtain a series of samples in the form of solid homogeneous materials. The fact of the epoxy ring opening in the resin was confirmed by IR spectroscopy. The catalytic properties of the metal atom in a metallosiloxane were found to affect the curing process. The samples demonstrate rather a high resistance to thermooxidative destruction, and in most cases, their glass transition temperatures are lower than those obtained upon standard curing of «ED-20» resin with triethylenetetramine. Partially siloxy-substituted metalloalkoxysiloxanes can be efficient agents for curing and formation of a hybrid material based on epoxy resins.     

Relationship between chemical degradation and thickness loss of an amine-cured epoxy coating exposed to different UV environments

The relationship between chemical degradation and thickness loss of an unpigmented, non UV-stabilized, crosslinked amine-cured epoxy coating exposed to three UV conditions was investigated. Spin-coated samples having a thickness of approximately 7 μm on an Si substrate were prepared from a stochiometric mixture of a bisphenol A epoxy resin and a tetra-functional amine curing agent. Samples were exposed outdoors and to two accelerated laboratory UV environments. Chemical degradation and thickness loss were measured by transmission Fourier transform infrared spectroscopy (FTIRS) and laser scanning confocal microscopy (LSCM), respectively. In addition, surface roughness and morphological changes were measured by atomic forcemicrosocopy (AFM) and LSCM. Substantial chemical degradation, thickness loss, and morpholocal changes occurred in the exposed films, and the rate of chemical degradation was greater than that due to the thickness loss. This additional chemical loss was attributed to an inhomogeneous degradation process in which nanoscale localized depressions initiate at certain sites on the surface, which then enlarge and deepen with exposure time. The results of this study provide a better understanding of the degradation mechanism and should lead to the development of scientific-based models for predicting the service life of crosslinked amine-cured epoxy coatings. Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, October 27–29, 2004, in Chicago, IL     

N-3 Polyunsaturated Fatty Acids Modulate In-Vitro T Cell Function in Type I Diabetic Patients

In this work, we assessed the in-vitro effects of eicosapentaenoic acid (EPA; C20:5n-3) and docosahexaenoic acid (DHA; C22:6n-3) (final concentration, 15 microM) on T cell blastogenesis, interleukin-2 and -4 (IL-2, IL-4) secretion, fatty acid composition and intracellular oxidative status in type I diabetic patients with or without complications. Con A stimulated lymphocyte proliferation, glucose uptake, intracellular reduced glutathione levels and catalase activity were lower in diabetics as compared to controls, regardless to the presence of complications. EPA and DHA diminished T-lymphocyte proliferation and IL-2 production but enhanced IL-4 secretion in both diabetic and control groups. No changes in the levels of reduced glutathione and in the activities of catalase and SOD were observed in control T cells cultured in the presence of EPA and DHA. However, in diabetic patients, addition of n-3 PUFA to culture induced an increase in T cell levels of reduced glutathione and hydroperoxide, and in activities of catalase and SOD. Low levels of arachidonic acid (C20:4n-6) were found in plasma membrane phospholipids of lymphocytes from diabetic patients compared to controls. Incubation of lymphocytes with EPA and DHA was associated with an incorporation of these fatty acids in membrane phospholipids. In conclusion, the beneficial effects of n-3 PUFA on T cell functions in type I diabetes could be attributed to their suppressive action and modulation of cytokine secretion, and to the improvement of intracellular oxidative status.     

Investigation of Flow Upstream of Orifices

A physical model study is conducted to investigate the flow field upstream of orifices. In particular, new experimental data for the upstream flow pattern resulting from multiple orifices, an orifice near a free surface, and a large orifice (where the pressure gradient across the orifice cannot be ignored) are collected and presented. A new potential flow solution for flow behind orifices is developed to include pressure gradient effects as well as to accurately superpose the solution due to multiple orifices and determine a solution close to orifices. The proposed solution compares well with the measured data for multiple orifices and for an orifice near a free surface. For a large orifice, the skew in the velocity profile in the vertical direction due to the pressure gradient is accurately predicted.     

Modeling and optimizing of factors affecting erosion–corrosion of AA6063–(TiC/Al2O3) hybrid composites by experimental design method

In this article, modeling and optimizing of factors affecting erosion–corrosion wear of aluminum alloy A6063 reinforced with (Al₂O₃/TiC) particles have been determined by experimental design method. The erosion–corrosion wear characteristics and mechanism of AA6063–(TiC/Al₂O₃) with experimental parameters namely; type and concentration of corrosive media in the slurry, erosion speed and time have been investigated. Two models for reinforced and unreinforced alloys were applied to describe the influences of these factors on the erosion behavior of alloys. The erosion–corrosion mechanisms of the AA6063–(TiC/Al₂O₃) were dominated by particles erosion wear in alkaline slurry, and by the interaction of particle erosion wear and medium corrosion in acidic slurry. The results of experimental work are coinciding with that of calculated ones confirming the successful modelization.     

Thermomechanical effects in the torsional actuation of twisted nylon 6 fiber

Thermally induced torsional and tensile actuators based on twisted polymeric fibers have opened new opportunities for the application of artificial muscles. These newly developed actuators show significant torsional deformations when subjected to temperature changes, and this torsional actuation is the defining mechanism for tensile actuation of twisted and coiled fibers. To date it has been found that these actuators require multiple heat/cool cycles (referred to as “training” cycles) prior to obtaining a fully reversible actuation response. Herein, the effect of annealing conditions applied to twisted nylon 6 monofilament is investigated and it is shown that annealing at 200 °C eliminates the need for the training cycles. Furthermore, the effect of an applied external torque on the torsional actuation is also investigated and torsional creep is shown to be affected by the temperature and load. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45529.     

Source localization using TDOA and FDOA measurements based on modified cuckoo search algorithm

This paper introduces a new algorithm for solving the localization problem of moving multiple disjoint sources using time difference of arrival and frequency difference of arrival. The localization of moving sources can be considered as a least-square problem. There are many algorithms used to solve this problem such as, two-step weighted least squares, constrained total least-square and practical constrained least-square. However, most of these algorithms suffer from either slow convergence or numerical instability and don’t attain Cramer–Rao lower bound. We introduce a free-gradient algorithm called cuckoo search which avoids the slow convergence problem. The cuckoo search provides a combined global and local search method. Simulation results show that the proposed algorithm achieves better performance than other algorithms and attains Cramer–Rao lower bound.     

Gas phase esterification of acetic acid with ethanol over MoO3 supported on AlPO4 and the effect of modification with phosphomolybdic acid and Ce4+ ions

A series of AIPO₄–MoO₃ (APM) systems with various molybdena loadings (5–50) mol %, same modified with phosphomolybdic acid (PMA) and cerium ions, were prepared by an impregnation method and calcined at 400 °C, except for the samples modified with PMA which were calcined at 350 °C for 4 h. The catalysts were characterized by TG/DTG, XRD, IR spectroscopy, N₂ adsorption and electrical conductivity measurements. The surface acidity and basicity of the catalysts were determined by adsorption of pyridine and the dehydration–dehydrogenation of isopropyl alcohol. The catalytic esterification of acetic acid with ethanol was carried out in a convention fixed bed reactor. The results clearly revealed that the catalyst with a composition of 10 mol % MoO₃ (APM10) was the most active and selective catalyst for the production of ethyl acetate. Moreover, the yield of ethyl acetate increases on addition of PMA into APM10 while it decreases on the addition of Ce⁴⁺ ions. These results were correlated with structure, semiconductivity and the acid–base properties of the prepared catalysts. Copyright © 2003 Society of Chemical Industry     

Vancomycin administration in continuous ambulatory peritoneal dialysis: the risk of ototoxicity

Patients diagnosed with nodules (NO = 40) in a large university hospital clinic and an age-stratum matched nondiseased group (ND = 200) described adverse outcomes of vocal impairment on work and work-related communications. NOs were significantly more likely than NDs to report symptoms of hoarseness (73% vs. 26%), high-note difficulty (70% vs. 20%), difficulty speaking with a lower voice (53% vs. 13%) and a tired voice (50% vs. 10%), and their greatest source of physical discomfort was associated with scratchiness (61% vs. 3%). The average number of symptoms was four in NOs and less than one in NDs. Nodule patients were most concerned about the effects their voice problem would have on their future career (78% vs. 24%) and 49% of NOS reported their voice problem had an adverse work effect in the past compared with 4% of NDs. Having a voice condition limited current job performance in 39% of the NO group but only in 2% of the ND group. The results suggest that a diagnosis of nodules plays a major role in disrupting careers and work activities and that available educational programs and additional research are needed for improving their functional ability and preventing adverse outcomes in the lives of individuals with voice disorders.